Healthier Sleep with a Holistically Healthy Mattress
Welcome to Holistic EMF Protection Made Easy readers. It’s great to see you’ve made your way here after reading about the importance of a holistically designed mattress. On this page, you’ll find a few more important facts about the GEOVITAL mattresses, a video tour of our facilities and explanation and a link to the shop where you can place your order for one.
Shielding Paint Instructions
The application of shielding paint is not difficult and is something you can do yourself inside the home. It handles like normal paint and with the right tools you’ll do a fine job. To achieve the results you wanted, meaning a worthwhile reduction in EMF radiation exposure from transmitted signals like 5G … AND… creating a healthy bedroom when considering the paint’s ingredients that need to be carefully chosen… you do need a product designed by those with a true wholistic approach to this subject and claimed performance based on independent testing. Despite is being more costly, you have these criterial well covered with T98 shielding paint and given it’s independently tested performance provides exceptional value for money. Better product means better chance of achieving the desired results. You don’t want to save money on shielding paint… you end up doing a poor job with possibly ingredients that don’t agree with you long term. Use the good stuff… You’re worth it.
2. How to prep your walls for shielding paint application
Same as with normal paint, the surface should be clean and a light sand would be good. Be careful with old paints already on the wall as it could be lead based paint. If you’re unsure, ask your local paint shop for a test kit or advise.
T98 Shielding Paint is a water bases (acrylic) paint. It was specially designed with not only exceptional RF radiation reduction as the goal, but also for it to be a healthy product that would fit into a wholistic approach to health. This is something we feel, we are totally alone in. T98 has very low VOC level and makes for a healthy bedroom and home on more than 1 level.
- If you have an acrylic paint you will be painting over, then T98 can go straight on it.
- If you have an oil based paint to go over, you’ll have to put a layer of special primer on first. Ask your local paint store for a healthy option.
- If you are painting a previously unpainted wall with shielding paint, then you want to put a quick coat of under coat on to take away the suction. Shielding paint is most costly and its a bit of a waste to spend in on suction. This is especially true for concrete walls and ceilings.
You may want to place drop sheets and tape of edged you don’t want paint on.
IMPORTANT: If you are dealing with previously unpainted surfaces, especially concrete, these surfaces will have a higher suction and will absorb a percentage of what you apply. As shielding paint is more costly that primer/under coat, it is advisable to apply a coat of primer/under coat to the new wall just to get rid of the suction with a cheaper material. After this, you follow the normal application as described here.
3. How to stir shielding paint
T98 shielding paint has a high concentration of graphite and carbon in it, to make the paint highly electrically conductive and give it its radio frequency deflecting abilities. It has been a long time since GEOVITAL invented shielding paint and it has been improved many times. The particals in the paint will settle in the bucket or bottle and will need to be stirred very well after opening. We urge you to use a paint mixer drill attachment, so you can ensure good mixing. Make sure to stir all areas of the bucket and leave no settles graphite and carbon untouched. You’ll not get nice smooth consistency, a bit like pancake mix.
Whilst you apply your first section of paint and use the paint in the paint tray that you have poured the paint into, the graphite and carbon will start to settle again in the bucket. When it comes time to top-up your paint tray, you don’t need the drill again (you can) but you could use a timber stick or manual paint stirrer to stir the shielding paint before you pour more into your paint tray. Fail to this and you’ll find more liquid paint midway in the bucket and by the time you come to the end, it will start to get thick again.
Stirring your shielding paint is very important. If you use trades people to do the painting for you, you will want to make sure they stir it right. You don’t want to find most of the shielding paint components that give it shielding, to be left in the bottom of the bucket.
4. How to apply shielding paint – Roller and Brushes to use
Using a rough surface roller (a napier 10 or 12 would be fine) you can roll shielding paint onto the wall using a paint tray. It goes a lot further than you might think. The trick is to not put it on too thin. You want to put a nice coat on. You also need the paint the edges and corners. You may want to paint them first before finishing the coat with the roller.
5. How to determine you applied enough shielding paint for your RF protection
You should calculate how much paint you expect to use for the amount of coats you’re planning to apply. Typically 3 or 2 coats. From there you can work out how much you should roughly use for each coat. The first coat always takes a bit more than subsequent shielding paint application. Once you have done the first coat, you should review how much you used and compare it with what you calculated you needed. If there is big difference (too little used) then you put it on the wall too thin. You’ll then simply have to roller an extra layer on to make sure you used near the calculated amount to achieve the shielding effectiveness.
You need to go around the room (not around the wall or ceiling panel), up and onto the ceiling and along one side of the ceiling panel. Approaches can vary but this gives you a rough idea. Again, ask your consultant for assistance. – You can join one end to the start of a new peice of grounding tape when the grounding tape has a highly electrically conductive adhesive (ours does and ours is a special brushed metal for good paint contact). Do try and avoid joins though… its therefor better to have 1 or a few BIG rolls of grounding tape instead of several smaller rolls and you come to the end of the roll all the time.
Use a rag to press the grounding tape firmly onto your shielding paint and be careful not to stretch it. Use scissors to cut it. In these videos you see the old take we used to use many years ago. We now use a metal tape instead which handle much easier.
Make sure you think ahead on how to make your connection to ground. You might want to ask your electrician ahead of time. Most people lead it into the cavity of the power outlet and connect it to the ground that is available there. You can use multiple outlets if your run of grounding tape around the room was interrupted by a door for example.
WARNING: If you do use more than one power outlet to ground to, the should not be from different electrical circuits.
7. Second (and third) coat of shielding paint application
Once the grounding tape is in place and you’ve checked that its application does indeed see tape on all painted panels and you are able have the connection to ground made by an electrician later, it is time for your subsequent coats of shielding paint. Perhaps follow the same order; Apply shielding paint to the corners and edges with a brush, after which you roller the larger areas. You’ll typically find you’ll use a little bit less paint on subsequent coats.
How many coats of shielding paint should I apply?
During an assessment in the home and ideally a body assessment to see how much RF radiation is absorbed in the body, you’ll get an appreciation of how high the levels are ‘today’. At this point in time (slowly introduction of 5G) we recommend the following:
- For shielding against electric fields from wiring alone, a single coat is sufficient.
- For shielding against radio frequency (RF) radiation the application of at least 2 coats has been standard for many years.
- When RF levels high or cell phone towers have a direct line-of-sight view of your home, then 3 coats are recommended.
- When wanting to be prepared for the increases of the future, a 3rd coat makes a lot of sense as it is so easy to apply with the others.
T98 shielding paint gives exceptional performance and has always been made to also protect well against higher frequencies which now proves invaluable with the introductions of Airfibre and 5G. During independent testing of professionally prepared test panels as well as testing of many test panels prepared by ordinary families, T98 keep showing to be ahead of the rest, is successfully applied by the non-trained and above this all designed with a wholistic approach to health.
8. Shielding doors with shielding paint
Doors can just be painted with brush and small roller as needed. Doors are typically not grounded as the connection with ground would be hard to make and there is no electric wiring on the other side of the door. For doors with a lot of glass, consider securing some NOVA shielding fabric onto the door to cover the glass.
Door typically don’t need to be kept completely closed to get good results with T98. Even a shielded door that is half open will close the hole in your shielding significantly and often dramatically improve the result in contrast with leaving the door unshielded. A body assessment should ideally be used to verify the results of shielding and a body assessment in our experience would also reveal if inferior products were used.
9. Does shielding paint block natural magnetic field signals?
No it doesn’t. Watch the video to show you this. The frequency of natural magnetic field signals is too low to be shielded against, the same way why magnetic fields from transmission lines and local distribution lines can’t be shielded against.
Summary of how to shield a room against 5G and other EMF radiation sources with Shielding Paint
You can do this! It is not difficult and with the right quality shielding paint designed for a overall wholistic approach to health, you are bound to get great result in reducing your EMF radiation exposure AND creating a healthy environment at the same time (those are not necessarily the same thing).
If you are a painter: You’ll find this a fascinating project. Today you are not just a home decorator, but you are in health care. Make sure you are totally confident with your grounding tape application. It is easy, but you need to follow specific principles to make it do what it is there for.
If you’re an amateur: You’ll be so proud of yourself when you’re done and will agree it was not difficult. The key is in preparation and understanding WHY you do things and WHY you are using that specific shielding paint. Not all EMF consultants critically analyse the heritage of products they work with or don’t realise the deceptive marketing used. You have to take control of this conscious choice of materials. Look at who is behind it. What is their goal and how did they get where they are now.
With T98 Shielding Paint you have the best option for your shielding project. You want to do this right the first time.
If you are an EMF consultant: You too can enable and encourage your clients to use T98 shielding paint, designed and benchmarked against health client and independently tested. Talk to us.
Good luck with your shielding project and we look forward to receiving a photo of you midway in your shielding project!
Patrick van der Burght
Senior Managing Partner GEOVITAL INTERNATIONAL
Director and Host of Health Stronghold
Domestic Radiation Specialist, International Speaker and EMF Consultant Trainer
Total project shielding paint videos
AN IMPORTANT PS:
I am not encouraging anyone to start shielding a home or bedroom without proper professional input. The application of shielding paint done correctly will enhance any home but it is unlikely to be the only source of radiation exposure that should be mitigated against and there could be problems that are unfixable and even shielding paint won’t fix. Get an on-site assessment done first (find our consultants or myself, here. if we’re not close, we do travel also internationally) and find out what the total story is. Then mitigate. Good luck.
EMF Q&A Videos
EMF Q&A
Some time ago, we dedicated months to welcoming live questions on anything EMF-related. That initiative has ended, but some of the answers are on YouTube. See some here.